15 Parts Location and Replacement Parts List

Notes:

Important safety notice:

Components identified by mark have special characteristics important for safety.

Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used.

When replacing any of these components, be sure to use only manufacturers’s specified parts shown in the parts list.
The parenthesized indications in the Remarks column specify the areas or color. (Refer to the cover page for area or color.)

Parts without these indications can be used for all areas.
Capacitor values are in microfarad (μF) unless specified otherwise, P=Pico-farads(pF); Farads.
Resistance values are in ohms, unless specified otherwise, 1K=1,000(ohms).
The marking (RTL) indicates that the Retention Time is limited for this item. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retention period of availabilityis dependant on the type of assembly, and in accordance with the laws govening part and product retention. After the end of this period, the assembly will no longer be available.
[M] indicates in the Remarks columns indicates parts that are supplied by MESA .
The “(SF)” mark denotes the standard part.
Remote Control Unit: Supply period for three years from terminal of production.

Reference for O/I book languages are as follows :